Skip to content

101 [hw][vga][dvi] video display dummies

75 Ohm Resistor (Any resistor between 50 and 150 ohms is okay)

[!TIP] simulating load on one signal, without soldering, or any extra hardware. I simply insert the resistor —75 Ω is the ideal spec— in the DVI output port to make contact between C1-C5 (analog red - analog ground), or C2-C5 (green - ground), or C3-C5 (blue - ground).

image image

not working with rgb connect with 75 Ohm, but need also field & row sync.

[!NOTE] Not working with external video card, but ok with internal video card.

image

Comments

konosubakonoakua · 2024-09-29T10:01:17Z

References

  • https://blog.zorinaq.com/the-5-second-vga-dummy-plug/